Question: What Is Subnetting Quizlet?

What is subnetting explain?

Subnetting is the strategy used to partition a single physical network into more than one smaller logical sub-networks (subnets).

An IP address includes a network segment and a host segment.

Subnetting is essential when a single network number has to be allocated over numerous segments of a local area network (LAN)..

What is subnetting and how it is done?

Subnetting is the process of stealing bits from the HOST part of an IP address in order to divide the larger network into smaller sub-networks called subnets. After subnetting, we end up with NETWORK SUBNET HOST fields.

What is a subnet mask and how is it used quizlet?

Subnet Mask. identifies which bits in the IP address are to be used to represent the network/subnet portion of an IP address.

What is purpose of subnetting?

Subnetting ensures that traffic destined for a device within a subnet stays in that subnet, which reduces congestion. Through strategic placement of subnets, you can help reduce your network’s load and more efficiently route traffic.

What is subnetting and why it is used?

Subnetting limits the IP address usage to within a few devices. This allows an engineer to use subnetting to create sub-networks, sorting data so that it can travel without touching every part of the more complex routers. … A subnet mask creates the tool which enables a router to match an IP address with a sub-network.

What is Subnet example?

For example, 255.255. 255.0 is the subnet mask for the prefix 198.51. 100.0/24. Traffic is exchanged between subnetworks through routers when the routing prefixes of the source address and the destination address differ.

What does a subnet look like?

The subnet mask looks a lot like an ip address. It is made up of four eight bit numbers separated by periods. These numbers once again range from 0 to 255. A typical subnet mask is 255.255.

How do you write a subnet?

Example: A class C network would have a subnet mask of 255.255. 255.0 which means that 24 bits are used for the network. In CIDR notation this is designated by a /24 following the IP address.

How do I connect to a subnet?

How to Connect Computers That Are on 2 Different SubnetsConnect the computers to the network. … Connect the routers to each other. … Enable a routing protocol in each subnet’s router. … Allow time for the routing tables to update. … Log into one of the computers on a subnet and issue a trace route command to the computer on the other subnet.

How do you solve subnet problems?

Solution-Subnet mask = 255.255.255.0.Number of bits borrowed from Host ID part = m.So, number of subnets possible = 2mNumber of bits available for Hosts = HID – m.So, number of hosts that can be configured = 2(HID – m) – 2.